.ocompany..ooo.productsoo......contact..............................................................................................o............
  Unshaped refractory products
     
Basic components: MgO, Spinel (MgO.Al2O3), M2S - forsterite
Nature of bond formed: chemical, chemical-ceramic, ceramic, organic
     
  Gunning mixes - LIPGAN
     
MgO based gunning mixes are suitable for repairing of BOF, EAF and ladle. They are applied by hot gunning.
     
  Ramming mixes - LIPRAM
     
MgO based ramming mixes are used for repairing of tap holes of EAF and well blocks of ladles. They are applied by ramming or vibration casting after mixing with water. Drying at 110°C is recommended in order to remove moisture before use.

MgO and M
2S based ramming mix is insulating material, which can substitute the insulating lining of ladles.
Spinel (MgO.Al
2O3) based ramming mixes are highly refractory products. They are recommended for the lining IF.
     
  Insulating sprayng mixes
     
MgO and M2S based mixes are applied to working lining of tundish with a very good adhesion. They are apllied with a special spraying machine to produce aligning with a thickness of 30-50 mm. Three hours of drying at 600°C is recommended before use.
     
  Insulating dry mixes
     
MgO based insulating dry mixes are applied to working lining of tundish or as backfill in ladles. They are applied to working lining of tundish with a special clishe. Drying at 200°C is recommended before use.
  Back to products page